-- *********************************************************************
-- CISCO-RADIUS-MIB.my: Radius Configuration Mib
--
-- October 2002, Vinay Gaonkar
-- March 2004, Binh Le
--
-- Copyright (c) 2002-2008 by cisco Systems Inc.
---- All rights reserved.
--
-- ******************************************************************CISCO-RADIUS-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,
OBJECT-TYPE,Unsigned32FROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
RowStatus,TEXTUAL-CONVENTION,TruthValueFROM SNMPv2-TC
InetAddressType,InetAddressFROM INET-ADDRESS-MIB
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
TimeIntervalMin,
TimeIntervalSec,
CiscoPort
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;ciscoRadiusMIB MODULE-IDENTITYLAST-UPDATED"200707220000Z"ORGANIZATION"Cisco Systems Inc."CONTACT-INFO"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-san@cisco.com"DESCRIPTION"MIB module for monitoring and configuring
authentication and logging services using RADIUS
(Remote Authentication Dial In User Service) related
objects.
The RADIUS (RFC2865) framework consists of clients and
servers. A client is responsible for passing user
information to designated RADIUS servers, and then
acting on the response which is returned.
RADIUS server is responsible for receiving user
connection requests, authenticating the user, and then
returning all configuration information necessary for
the client to deliver service to the user.
This MIB module also contains objects for
enabling/disabling telnet and SSH (Secure Shell)
authentication. Secure Shell is program which is used
to log into another machine over a secured session."REVISION"200707220000Z"DESCRIPTION"Added support of crmRadiusKeepAliveUserGroup."REVISION"200701030000Z"DESCRIPTION"Added support of
crmKeepAliveGroup,
crmAutoInitializeConfigGroup, and
crmAttributesGroup2."REVISION"200403030000Z"
DESCRIPTION"Added support of
crRadiusFramedIpAddrIncluded,
crRadiusVlanAssignmentEnabled,
crVlanGroupTable.
Added http(2) bit to crRadiusLoginAuthentication."REVISION"200211090000Z"DESCRIPTION"Removed the TC CiscoRadiusAuthKeyType.
Added new TC CiscoRadiusAuthKey.
Removed the objects crRadiusAuthKeyType and
crRadiusServerKeyType.
Changed the SYNTAX of objects crRadiusAuthKey and
crRadiusServerKey."REVISION"200210080000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoMgmt 288}ciscoRadiusMIBObjects OBJECTIDENTIFIER::={ ciscoRadiusMIB 1}ciscoRadiusMIBConformance OBJECTIDENTIFIER::={ ciscoRadiusMIB 2}crRadiusGenericConfig OBJECTIDENTIFIER
::={ ciscoRadiusMIBObjects 1}crRadiusServerConfig OBJECTIDENTIFIER::={ ciscoRadiusMIBObjects 2}crRadiusAttributesConfig OBJECTIDENTIFIER::={ ciscoRadiusMIBObjects 3}crRadiusVlanConfigGroup OBJECTIDENTIFIER::={ ciscoRadiusMIBObjects 4}crRadiusKeepAliveConfig OBJECTIDENTIFIER::={ ciscoRadiusMIBObjects 5}-- Textual ConventionsCiscoRadiusAuthKey ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The authentication key of a radius server.
The first octet of this object contains the the type of key.
The octets following the first octet contain the key.
If the value of the first object is ascii value 'p', then the
key is in plain text.
If the value of first object is ascii value 'e', the key is
encrypted.
Note that this object has same format as TC DisplayString."SYNTAXOCTETSTRING(SIZE(0..65))-- the RADIUS Configuration groupcrRadiusLoginAuthentication OBJECT-TYPESYNTAXBITS{telnet(0),console(1),http(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION
"The login authentication using RADIUS feature is enabled for
telnet/SSH sessions if the 'telnet (0) ' bit is set, and
disabled if this bit is reset.
The login authentication using RADIUS feature is enabled for
console sessions if the 'console (1) ' bit is set, and
disabled if this bit is reset.
The login authentication using RADIUS feature is enabled for
remote web sessions if the 'http (2) ' bit is set, and
disabled if this bit is reset."DEFVAL{{}}::={ crRadiusGenericConfig 1}crRadiusDeadtime OBJECT-TYPESYNTAX TimeIntervalMin (0..1440)UNITS"minutes"MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicates the length of time in minutes that the system will
mark the server dead when a RADIUS server does not respond to
an authentication request. During the interval of the dead
time, any authentication request that comes up would not be
sent to that RADIUS server that was marked as dead. The
default value of 0 means that the RADIUS servers will not be
marked dead if they do not respond."DEFVAL{0}::={ crRadiusGenericConfig 2}crRadiusAuthKey OBJECT-TYPESYNTAX CiscoRadiusAuthKey
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The key used in encrypting the packets passed between the
RADIUS server and the client. This key must match the one
configured on the server.
A zero-length string is always returned when this object is
read."::={ crRadiusGenericConfig 3}crRadiusTimeout OBJECT-TYPESYNTAX TimeIntervalSec (1..1000)
UNITS"seconds"MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This is the time in seconds between retransmissions to
the RADIUS server."DEFVAL{1}::={ crRadiusGenericConfig 4}crRadiusRetransmits OBJECT-TYPESYNTAXUnsigned32(0..100)UNITS"retransmits"MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The additional number of times the RADIUS server should be
tried by the RADIUS client before giving up on the server."DEFVAL{1}::={ crRadiusGenericConfig 5}crRadiusAccountingLogMaxSize OBJECT-TYPESYNTAXUnsigned32(0..30000)UNITS"bytes"MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The maximum size of the accounting log file in bytes.
The log file is stored on local persistent storage at the
device. If the size is set to a smaller value than the
existing one, then smaller log will be available for view
by the user."DEFVAL{30000}::={ crRadiusGenericConfig 6}crRadiusAccountingMethod OBJECT-TYPESYNTAXBITS{radius(0),
local(1)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The accounting method on the device. If bit 0
is set, the accounting method is RADIUS. If bit 1
is set, then the accounting method is local. It is
possible for the user to set both the bits so that
both the RADIUS as well as local accounting methods
are used. It is also possible to set none of the
methods; in this case the switch will not do any
accounting."::={ crRadiusGenericConfig 7}crRadiusFramedIpAddrIncluded OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies if Access-Request packets will include
Framed-IP-Address attributes."::={ crRadiusAttributesConfig 1}
crRadiusFramedMtu OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the Framed-MTU attribute value to be sent to
the RADIUS server."REFERENCE"RFC2865: Section 5.12"::={ crRadiusAttributesConfig 2}crRadiusServerTableMaxEntries OBJECT-TYPESYNTAXUnsigned32(0..65536)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The maximum number of entries that the agent supports in the
crRadiusServerTable."::={ crRadiusServerConfig 1}
-- crRadiusServerTablecrRadiusServerTable OBJECT-TYPESYNTAXSEQUENCEOF CrRadiusServerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table lists RADIUS servers."::={ crRadiusServerConfig 2}crRadiusServerEntry OBJECT-TYPESYNTAX CrRadiusServerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A RADIUS server table entry.
Users can add/delete entries in this table using object
'crRadiusServerRowStatus'.
An entry cannot be created until following objects are
instantiated :
- crRadiusServerAddrType
- crRadiusServerAddr
Also, following objects cannot be modified when
'crRadiusServerRowStatus' is 'active' :
- crRadiusServerAddrType
- crRadiusServerAddr
To modify above objects, the entry must be deleted and
re-created with new values of above objects.
If 'crRadiusServerKey' is not instantiated or is a
zero-length string, then value of the object
'crRadiusAuthkey' is used as the key to communicate with the
corresponding RADIUS server."INDEX{ crRadiusServerIndex }::={ crRadiusServerTable 1}
CrRadiusServerEntry ::=SEQUENCE{
crRadiusServerIndex Unsigned32,
crRadiusServerAddrType InetAddressType,
crRadiusServerAddr InetAddress,
crRadiusServerAuthPort CiscoPort,
crRadiusServerAcctPort CiscoPort,
crRadiusServerKey CiscoRadiusAuthKey,
crRadiusServerType INTEGER,
crRadiusServerMode INTEGER,
crRadiusServerRowStatus RowStatus}crRadiusServerIndex OBJECT-TYPESYNTAXUnsigned32(1..4294967295)
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An arbitrary integer value, greater than zero, and less than
and equal to crRadiusServerTableMaxEntries, which identifies
a RADIUS Server in this table.
The value of this object must be persistent across
reboots/reinitialization of the device."::={ crRadiusServerEntry 1}crRadiusServerAddrType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The type of address of the RADIUS Server as specified by
object 'crRadiusServerAddr'."DEFVAL{ ipv4 }::={ crRadiusServerEntry 2}
crRadiusServerAddr OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The address of the RADIUS Server."::={ crRadiusServerEntry 3}crRadiusServerAuthPort OBJECT-TYPESYNTAX CiscoPort
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This is the destination UDP port number to which RADIUS
authentication messages should be sent. The RADIUS server
will not be used for authentication if this port number is
0."DEFVAL{1812}::={ crRadiusServerEntry 4}crRadiusServerAcctPort OBJECT-TYPESYNTAX CiscoPort
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This is the destination UDP port number to which RADIUS
accounting messages should be sent."DEFVAL{1813}::={ crRadiusServerEntry 5}crRadiusServerKey OBJECT-TYPESYNTAX CiscoRadiusAuthKey
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The key used in encrypting the packets passed between the
RADIUS server and the client. This key must match the one
configured on the server.
A zero-length string is always returned when this object is
read.
Note that if this object is a zero length string, then
'crRadiusAuthKey' is used as the key for this server."DEFVAL{ ''H }::={ crRadiusServerEntry 6}
crRadiusServerType OBJECT-TYPESYNTAXINTEGER{other(1),primary(2)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Type of the RADIUS server.
other (1), - a lower priority server
primary (2) - the primary server which is tried first
by the RADIUS client."DEFVAL{ other }::={ crRadiusServerEntry 7}crRadiusServerMode OBJECT-TYPESYNTAXINTEGER{none(1),authAndAcct(2),
authOnly(3),acctOnly(4)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Mode of the RADIUS server.
none (1) - neither authentication nor
accounting
authAndAcct (2) - both authentication and
accounting
authOnly (3) - only for authentication
acctOnly (4) - only for accounting."DEFVAL{ authAndAcct }::={ crRadiusServerEntry 8}crRadiusServerRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"Status of this row."::={ crRadiusServerEntry 9}crRadiusVlanAssignmentEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies if VLANs will be assigned by RADIUS server
via the tunnel attribute during the authentication."::={ crRadiusVlanConfigGroup 1}crVlanGroupTable OBJECT-TYPESYNTAXSEQUENCEOF CrVlanGroupEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table containing VLAN Group Mapping information for the
purpose of distributing users across multiple VLANs which
have the same group name."::={ crRadiusVlanConfigGroup 2}
crVlanGroupEntry OBJECT-TYPESYNTAX CrVlanGroupEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry containing an VLAN Group Mapping information
applicable to a particular VLAN. Entries in this table can
be created or deleted using cpaeVlanGroupRowStatus object."INDEX{ crVlanGroupName }::={ crVlanGroupTable 1}
CrVlanGroupEntry ::=SEQUENCE{
crVlanGroupName SnmpAdminString,
crVlanGroupVlansLow OCTETSTRING,
crVlanGroupVlansHigh OCTETSTRING,
crVlanGroupRowStatus RowStatus}crVlanGroupName OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"Specifies the name of the VLAN group."::={ crVlanGroupEntry 1}crVlanGroupVlansLow OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..256))MAX-ACCESSread-createSTATUScurrentDESCRIPTION"A string of octets containing one bit per VLAN for VLANs
with VlanIndex value of 0 to 2047.
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 0 through
7, the second octet specifying VLANs 8 through 15, etc.
Within each octet, the most significant bit represents
the lowest numbered VLAN, and the least significant bit
represents the highest numbered VLAN. Thus, each VLAN
of the device is represented by a single bit within
the value of this object. If that bit has a value of
'1' then that VLAN is included in the group; the VLAN
is not mapped to the group if its bit has a value of
'0'."::={ crVlanGroupEntry 2}crVlanGroupVlansHigh OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..256))MAX-ACCESSread-createSTATUScurrentDESCRIPTION"A string of octets containing one bit per VLAN for VLANs
with VlanIndex value of 2048 to 4095.
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2048 through
2055, the second octet specifying VLANs 2056 through 2063,
etc. Within each octet, the most significant bit represents
the lowest numbered VLAN, and the least significant bit
represents the highest numbered VLAN. Thus, each VLAN
of the device is represented by a single bit within
the value of this object. If that bit has a value of
'1' then that VLAN is included in the group; the VLAN
is not mapped to the group if its bit has a value of
'0'."::={ crVlanGroupEntry 3}crVlanGroupRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object is used to manage the creation and deletion
of rows in this table.
The only way to create an entry is by setting the value
createAndGo(4), and the only way to delete an entry is by
setting the value destroy(6) to this object."::={ crVlanGroupEntry 4}-- RADIUS keep-alive Group
--
-- RADIUS keep-alive feature provides RADIUS tracking configuration.
-- With RADIUS keep-alive feature enabled, a tracking message is sent to
-- every configured RADIUS servers after every keep-alive timer to
-- query the status of the servers.crRadiusKeepAliveEnabled OBJECT-TYPESYNTAXTruthValue
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies whether RADIUS keep-alive feature is
enabled or not."::={ crRadiusKeepAliveConfig 1}crRadiusKeepAliveInterval OBJECT-TYPESYNTAXUnsigned32UNITS"seconds"MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the RADIUS keep-alive interval value. When the
object value of crRadiusKeepAliveEnabled is 'true',
a tracking message is sent to every configured RADIUS
server at the interval of crRadiusKeepAliveInterval to
query the status of the server."::={ crRadiusKeepAliveConfig 2}crRadiusKeepAliveServerTable OBJECT-TYPESYNTAXSEQUENCEOF CrRadiusKeepAliveServerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the keep-alive information on
every RADIUS server configured on the system."::={ crRadiusKeepAliveConfig 3}crRadiusKeepAliveServerEntry OBJECT-TYPESYNTAX CrRadiusKeepAliveServerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry containing keep-alive information of a
corresponding RADIUS server configured in
crRadiusServerTable."INDEX{ crRadiusServerIndex }::={ crRadiusKeepAliveServerTable 1}
CrRadiusKeepAliveServerEntry ::=SEQUENCE{
crRadiusKeepAliveServerStatus INTEGER}crRadiusKeepAliveServerStatus OBJECT-TYPESYNTAXINTEGER{other(1),init(2),active(3),checkup(4),dead(5)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the current keep-alive status of the RADIUS server.
other : none of the following.
init : the server is in init state.
active : the server is in active state.
checkup: the server is in checkup state.
dead : the server is in dead state.
This object is only instantiated when the corresponding
instance value of crRadiusServerRowStatus is 'active' and
the object value of crRadiusKeepAliveEnabled is 'true'."::={ crRadiusKeepAliveServerEntry 1}crRadiusPortAutoInitialize OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies whether a port's state machines will be re-
initialized if their state machines are in 'aaaFail'
when a RADIUS server becomes available."::={ crRadiusKeepAliveConfig 4}crRadiusKeepAliveUserName OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the user name used in keep-alive communication
with RADIUS server."::={ crRadiusKeepAliveConfig 5}-- Conformance
ciscoRadiusMIBCompliances OBJECTIDENTIFIER::={ ciscoRadiusMIBConformance 1}ciscoRadiusMIBGroups OBJECTIDENTIFIER::={ ciscoRadiusMIBConformance 2}ciscoRadiusMIBCompliance MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for entities which implement the
CISCO-RADIUS-MIB."MODULE-- this moduleMANDATORY-GROUPS{ crmConfigurationGroup }OBJECT crRadiusTimeout
SYNTAX TimeIntervalSec (1..60)DESCRIPTION"Only the range 1-60 needs to be supported."OBJECT crRadiusRetransmits
SYNTAXUnsigned32(0..5)
DESCRIPTION"Only the range 0-5 needs to be supported."OBJECT crRadiusServerAddrType
SYNTAXINTEGER{
ipv4(1),
dns(16)}DESCRIPTION"Only dns and ipv4 addresses are needed to be supported."OBJECT crRadiusServerRowStatus
SYNTAXINTEGER{
active(1),
createAndGo(4),
destroy(6)}DESCRIPTION"Only 'active', 'createAndGo' and 'destroy' are needed to be
supported."OBJECT crRadiusDeadtime
MIN-ACCESSread-onlyDESCRIPTION"Only read-only access is needed to be implemented."::={ ciscoRadiusMIBCompliances 1}ciscoRadiusMIBCompliance2 MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for entities which implement the
CISCO-RADIUS-MIB."MODULE-- this moduleMANDATORY-GROUPS{ crmConfigurationGroup }GROUP crmAttributesGroup
DESCRIPTION"This group is mandatory only in implementation
which support RADIUS attribute configuration."GROUP crmKeepAliveGroup
DESCRIPTION"This group is mandatory only for implementation
which supports RADIUS keep-alive feature."GROUP crmAutoInitializeConfigGroup
DESCRIPTION"This group is mandatory only for implementation
which supports RADIUS port auto initialization."GROUP crmAttributesGroup2
DESCRIPTION"This group is mandatory only in implementation
which support additional RADIUS attribute
configuration."OBJECT crRadiusTimeout
SYNTAX TimeIntervalSec (1..60)DESCRIPTION"Only the range 1-60 needs to be supported."OBJECT crRadiusRetransmits
SYNTAXUnsigned32(0..5)DESCRIPTION"Only the range 0-5 needs to be supported."OBJECT crRadiusServerAddrType
SYNTAXINTEGER{
ipv4(1),
dns(16)
}DESCRIPTION"Only dns and ipv4 addresses are needed to be supported."OBJECT crRadiusServerRowStatus
SYNTAXINTEGER{
active(1),
createAndGo(4),
destroy(6)}DESCRIPTION"Only 'active', 'createAndGo' and 'destroy' are needed to be
supported."OBJECT crRadiusDeadtime
MIN-ACCESSread-onlyDESCRIPTION"Only read-only access is needed to be implemented."::={ ciscoRadiusMIBCompliances 2}ciscoRadiusMIBCompliance3 MODULE-COMPLIANCESTATUScurrent
DESCRIPTION"The compliance statement for entities which implement the
CISCO-RADIUS-MIB."MODULE-- this moduleMANDATORY-GROUPS{ crmConfigurationGroup }GROUP crmAttributesGroup
DESCRIPTION"This group is mandatory only in implementation
which supports RADIUS attribute configuration."GROUP crmKeepAliveGroup
DESCRIPTION"This group is mandatory only in implementation
which supports RADIUS keep-alive feature."GROUP crmAutoInitializeConfigGroup
DESCRIPTION"This group is mandatory only in implementation
which supports RADIUS port auto initialization."GROUP crmAttributesGroup2
DESCRIPTION"This group is mandatory only in implementation
which supports additional RADIUS attribute
configuration."GROUP crmVlanConfigGroup
DESCRIPTION"This group is mandatory only in implementation
which supports RADIUS VLAN assignment configuration."GROUP crmRadiusKeepAliveUserGroup
DESCRIPTION"This group is mandatory only in implementation
which supports RADIUS keep-alive user configuration."OBJECT crRadiusTimeout
SYNTAX TimeIntervalSec (1..60)DESCRIPTION"Only the range 1-60 needs to be supported."OBJECT crRadiusRetransmits
SYNTAXUnsigned32(0..5)DESCRIPTION"Only the range 0-5 needs to be supported."OBJECT crRadiusServerAddrType
SYNTAXINTEGER{
ipv4(1),
dns(16)
}DESCRIPTION"Only dns and ipv4 addresses are needed to be supported."OBJECT crRadiusServerRowStatus
SYNTAXINTEGER{
active(1),
createAndGo(4),
destroy(6)}DESCRIPTION"Only 'active', 'createAndGo' and 'destroy' are needed to be
supported."OBJECT crRadiusDeadtime
MIN-ACCESSread-onlyDESCRIPTION"Only read-only access is needed to be implemented."::={ ciscoRadiusMIBCompliances 3}-- Units of ConformancecrmConfigurationGroup OBJECT-GROUPOBJECTS{
crRadiusLoginAuthentication,
crRadiusAuthKey,
crRadiusTimeout,
crRadiusRetransmits,
crRadiusDeadtime,
crRadiusAccountingLogMaxSize,
crRadiusAccountingMethod,
crRadiusServerTableMaxEntries,
crRadiusServerAddrType,
crRadiusServerAddr,
crRadiusServerAuthPort,
crRadiusServerAcctPort,
crRadiusServerKey,
crRadiusServerType,
crRadiusServerMode,
crRadiusServerRowStatus
}STATUScurrentDESCRIPTION"A collection of objects for RADIUS configuration."::={ ciscoRadiusMIBGroups 1}crmAttributesGroup OBJECT-GROUP
OBJECTS{ crRadiusFramedIpAddrIncluded }STATUScurrentDESCRIPTION"A collection of objects for RADIUS attributes
configuration."::={ ciscoRadiusMIBGroups 2}crmVlanConfigGroup OBJECT-GROUPOBJECTS{
crRadiusVlanAssignmentEnabled,
crVlanGroupVlansLow,
crVlanGroupVlansHigh,
crVlanGroupRowStatus
}STATUScurrentDESCRIPTION"A collection of objects for RADIUS Vlans assignment
configuration."::={ ciscoRadiusMIBGroups 3}crmKeepAliveGroup OBJECT-GROUPOBJECTS{
crRadiusKeepAliveEnabled,
crRadiusKeepAliveInterval,
crRadiusKeepAliveServerStatus
}STATUScurrentDESCRIPTION"A collection of objects for RADIUS keep-alive
information."::={ ciscoRadiusMIBGroups 4}crmAutoInitializeConfigGroup OBJECT-GROUPOBJECTS{ crRadiusPortAutoInitialize }STATUScurrentDESCRIPTION"A collection of objects for RADIUS auto initialize
configuration."::={ ciscoRadiusMIBGroups 5}crmAttributesGroup2 OBJECT-GROUPOBJECTS{ crRadiusFramedMtu }STATUScurrentDESCRIPTION"A collection of additional objects for RADIUS
attributes configuration."::={ ciscoRadiusMIBGroups 6}crmRadiusKeepAliveUserGroup OBJECT-GROUPOBJECTS{ crRadiusKeepAliveUserName }STATUScurrentDESCRIPTION"A collection of objects for RADIUS keep-alive
user configuration."::={ ciscoRadiusMIBGroups 7}END