-- *****************************************************************
-- CISCO-CAT6K-CROSSBAR-MIB.my
--
-- Mar 2001, Padma Pullela
-- Nov. 2002, Padma Pullela/Lilian Jiang
-- March 2003, Padma Pullela
-- June 2004, Padma Pullela
---- Copyright (c) 2001-2002, 2003-2007 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************CISCO-CAT6K-CROSSBAR-MIB DEFINITIONS::=BEGIN
IMPORTSMODULE-IDENTITY,OBJECT-TYPE,Counter32,Unsigned32,Gauge32,NOTIFICATION-TYPEFROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF
TEXTUAL-CONVENTION,TruthValue,DisplayString,DateAndTime,TimeStampFROM SNMPv2-TC
entPhysicalName,entPhysicalVendorType,entPhysicalIndex
FROM ENTITY-MIB
Percent
FROM CISCO-QOS-PIB-MIB
ciscoMgmt
FROM CISCO-SMI;ciscoCat6kCrossbarMIB MODULE-IDENTITYLAST-UPDATED"200712180000Z"
ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-cat6000@cisco.com"DESCRIPTION"The Catalyst 6000 Crossbar MIB provides instrumentation for
configuration and operation of the crossbar switching fabric
module, and additional functionalities for switching bus
and internal bus, etc.
"REVISION"200712180000Z"DESCRIPTION"Added cc6kxbarSysCapPfcOperModeGroup,
cc6kxbarSysCapSwitchResGroup, cc6kxbarChannelUtilGroup1,
cc6kxbarSwBusGroup1, cc6kxbarErrorGroup,
cc6kxbarErrRcvryThresholdGroup and
cc6kxbarErrRcvrySwitchoverGroup."REVISION"200612190000Z"DESCRIPTION"Added cc6kxbarDcefOnlyModeAllowedGroup,
cc6kxbarForceBusModeGroup,
cc6kxbarFlowCtrlNotifCtrlGroup,
cc6kxbarFlowCtrlBusThreshGroup,
cc6kxbarFlowCtrlBusThrNotifGroup
and cc6kxbarBusOnlyModeOperGroup."REVISION"200411190000Z"
DESCRIPTION"Added cc6kxbarIntBusCRCErrGroup."REVISION"200408110000Z"DESCRIPTION"Added cc6kxbarIntBusNotifControlGroup and
cc6kxbarIntBusCRCErrNotifGroup."REVISION"200406110000Z"DESCRIPTION"Added cc6kxbarTruncatedModeOper Object and changed the
description of cc6kxbarTruncatedModeAllowed and
cc6kxbarMinFabricPresent."REVISION"200309290000Z"DESCRIPTION"Changed the description of cc6kxbarTruncatedModeAllowed and
cc6kxbarMinFabricPresent. Removed default value for
cc6kxbarTruncatedModeAllowed."REVISION"200304020000Z"DESCRIPTION"Changed the SYNTAX and description of cc6kxbarMinFabricPresent
and description of cc6kxbarTruncatedModeAllowed."REVISION"200212050000Z"DESCRIPTION"Added cc6kxbarModuleChannelSpeed, cc6kxbarSwBusSwitchingStatus,
cc6kxbarSwBusFailureDuration, cc6kxbarSwBusNotifEnable
objects and cc6kxbarSwBusStallNotif notification."REVISION"200106250000Z"
DESCRIPTION"Initial version of this MIB module."::={ ciscoMgmt 217}ciscoCat6kXbarMIBObjects OBJECTIDENTIFIER::={ ciscoCat6kCrossbarMIB 1}cc6kxbarConfiguration OBJECTIDENTIFIER::={ ciscoCat6kXbarMIBObjects 1}cc6kxbarStatus OBJECTIDENTIFIER::={ ciscoCat6kXbarMIBObjects 2}cc6kxbarStatistics OBJECTIDENTIFIER::={ ciscoCat6kXbarMIBObjects 3}cc6kxbarSwBusObjects OBJECTIDENTIFIER::={ ciscoCat6kXbarMIBObjects 4}cc6kxbarIntBusObjects OBJECTIDENTIFIER::={ ciscoCat6kXbarMIBObjects 5}
cc6kxbarFlowCtrlObjects OBJECTIDENTIFIER::={ ciscoCat6kXbarMIBObjects 6}cc6kxbarSystemCapacityObjects OBJECTIDENTIFIER::={ ciscoCat6kXbarMIBObjects 7}cc6kxbarErrorRecoveryObjects OBJECTIDENTIFIER::={ ciscoCat6kXbarMIBObjects 8}-- Textual ConventionsModuleSlotNumber ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Slot number of the module."SYNTAXUnsigned32FabricChannelNumber ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Fabric channel number."SYNTAXUnsigned32
ChannelStatus ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Status of the Channel."SYNTAXINTEGER{ok(1),syncError(2),heartbeatError(3),crcError(4),bufferError(5),timeoutError(6),unused(7)}-- Configuration objectscc6kxbarFallbackMode OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"cc6kxbarFallbackMode controls system fallback to bus-mode
after loss of switching fabric module.
'true' - When the last fabric card is removed
system will adjust the supervisor and
line cards switching mode automatically without
resetting the system. With this feature enabled,
the switch might lose traffic while it's
changing the switching mode.
'false' - All the ports in the system will be
disabled when the last fabric card is removed."DEFVAL{ true }::={ cc6kxbarConfiguration 1}cc6kxbarBusOnlyModeAllowed OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicates whether bus mode is administratively enabled on
the device or not."::={ cc6kxbarConfiguration 2}cc6kxbarTruncatedModeAllowed OBJECT-TYPE
SYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicates whether truncated mode is
administratively enabled on the device or not."::={ cc6kxbarConfiguration 3}cc6kxbarMinFabricPresent OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object indicates the minimum number
of switching fabric capable modules to be present in the
system, for any switching fabric capable module to be in
'crossbarmode' indicated by cc6kxbarModuleModeSwitchingMode,
when cc6kxbarTruncatedModeOper is 'false'."::={ cc6kxbarConfiguration 4}cc6kxbarLcdBannerTable OBJECT-TYPESYNTAXSEQUENCEOF Cc6kxbarLcdBannerEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"cc6kxbarLcdBannerTable configures the Lcd banner of the
fabric module."::={ cc6kxbarConfiguration 5}cc6kxbarLcdBannerEntry OBJECT-TYPESYNTAX Cc6kxbarLcdBannerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in cc6kxbarLcdBannerTable.
Entries are created by the agent based on the
size of the lcd banner."INDEX{ cc6kxbarLcdBannerIndex }::={ cc6kxbarLcdBannerTable 1}
Cc6kxbarLcdBannerEntry ::=SEQUENCE{
cc6kxbarLcdBannerIndex Unsigned32,
cc6kxbarLcdBannerBanner DisplayString,
cc6kxbarLcdBannerMaxSize Unsigned32}cc6kxbarLcdBannerIndex OBJECT-TYPESYNTAXUnsigned32
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Object which specifies a unique entry in the
table."::={ cc6kxbarLcdBannerEntry 1}cc6kxbarLcdBannerBanner OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Message that would be displayed on the fabric card LCD.
The size of cc6kxbarLcdBannerBanner should be less than
or equal to the cc6kxbarLcdBannerMaxSize value."::={ cc6kxbarLcdBannerEntry 2}cc6kxbarLcdBannerMaxSize OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Maximum size of the associated cc6kxbarLcdBannerBanner
object."::={ cc6kxbarLcdBannerEntry 3}cc6kxbarTruncatedModeOper OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates if the truncated mode is
operationally enabled on the device or not.
'true' - With the fabric module present in the system,
cc6kxbarModuleModeSwitchingMode will be
'crossbarmode' for all the fabric capable
modules.
'false'- With the cc6kxbarMinFabricPresent fabric capable
modules and the fabric module present in the system,
cc6kxbarModuleModeSwitchingMode
will be 'crossbarmode' for fabric capable modules."::={ cc6kxbarConfiguration 6}cc6kxbarDcefOnlyModeAllowed OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicates whether the dcef mode is enabled on the standby
supervisor or not.
'true' - Setting cc6kxbarDcefOnlyModeAllowed to 'true'
makes the cc6kxbarModuleModeSwitchingMode of
all the active modules to 'dcefmode'.
With the active fabric module present in the system,
with the switch being in stateful switchover mode,
with all the cards that has no distributed Cisco
Express forwarding switching support being
powered down and on some platforms with standby
supervisor ports being shutdown, changing
cc6kxbarDcefOnlyModeAllowed to 'true' will make the
standby supervisor module reloaded and booted up
as distributed forwarding module.
'false'- Setting cc6kxbarDcefOnlyModeAllowed to 'false'
makes the cc6kxbarModuleModeSwitchingMode of the
standby supervisor module to the default value.
Changing cc6kxbarDcefOnlyModeAllowed to 'false'
will make the standby supervisor reloaded and booted
up with the default cc6kxbarModuleModeSwitchingMode."::={ cc6kxbarConfiguration 7}cc6kxbarForceBusMode OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-write
STATUScurrentDESCRIPTION"Indicates whether some affected modules are forced to be in
'busmode' or not.
'true' - Setting cc6kxbarForceBusMode to 'true' makes the
cc6kxbarModuleModeSwitchingMode of all
the affected modules to 'busmode'. Changing the
cc6kxbarForceBusMode to 'true' will make all the
affected modules reloaded and booted up as
non fabric capable modules.
'false'- Setting cc6kxbarForceBusMode to 'false' makes the
cc6kxbarModuleModeSwitchingMode of all the affected
modules to the default value. Changing
cc6kxbarForceBusMode to 'false' will make all the
affected modules reloaded and booted up with the
default cc6kxbarModuleModeSwitchingMode."::={ cc6kxbarConfiguration 8}cc6kxbarBusOnlyModeOper OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates if the bus mode is operationaly enabled on the
device or not.
'true' - Modules are allowed to run in 'busmode'.
'false' - None of the modules are allowed to run in 'busmode'
i.e., All the non-fabric capable modules will
be powered off. Absence of fabric module results
in all the fabric capable modules being powered
off."::={ cc6kxbarConfiguration 9}-- Status objectscc6kxbarFabricActiveSlot OBJECT-TYPESYNTAX ModuleSlotNumber
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"cc6kxbarFabricActiveSlot indicates the slot number of the
active switching fabric module. A value of zero indicates
that the active switching fabric module is either powered
down or not present in the chassis."::={ cc6kxbarStatus 1}cc6kxbarFabricBackupSlot OBJECT-TYPESYNTAX ModuleSlotNumber
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"cc6kxbarFabricBackupSlot indicates the slot number of the
backup switching fabric module. A value of zero indicates
that the backup switching fabric module is either powered
down or not present in the chassis."::={ cc6kxbarStatus 2}cc6kxbarModuleModeTable OBJECT-TYPESYNTAXSEQUENCEOF Cc6kxbarModuleModeEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"cc6kxbarModuleModeTable indicates the switching mode of each
module in the system."::={ cc6kxbarStatus 3}cc6kxbarModuleModeEntry OBJECT-TYPESYNTAX Cc6kxbarModuleModeEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in cc6kxbarModuleModeTable. The agent creates
an entry when a non switching fabric module
is inserted in the chassis.
The agent destroys an entry when a non switching fabric
module is power down or reset or removed from the chassis."
INDEX{ cc6kxbarModuleModeModule }::={ cc6kxbarModuleModeTable 1}
Cc6kxbarModuleModeEntry ::=SEQUENCE{
cc6kxbarModuleModeModule ModuleSlotNumber,
cc6kxbarModuleModeSwitchingMode INTEGER}cc6kxbarModuleModeModule OBJECT-TYPESYNTAX ModuleSlotNumber
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The module slot number."::={ cc6kxbarModuleModeEntry 1}cc6kxbarModuleModeSwitchingMode OBJECT-TYPESYNTAXINTEGER{busmode(1),crossbarmode(2),dcefmode(3)
}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"cc6kxbarModuleModeSwitchingMode indicates switching mode
of the cc6kxbarModuleModeModule.
'busmode' - Modules in this mode don't use fabric.
Backplane is used for both lookup and data
forwarding.
'crossbarmode' - Modules in this mode use backplane
for forwarding decision and fabric for data
forwarding
'dcefmode' - Modules in this mode use fabric for data
forwarding and local forwarding is enabled."::={ cc6kxbarModuleModeEntry 2}cc6kxbarModuleChannelTable OBJECT-TYPESYNTAXSEQUENCEOF Cc6kxbarModuleChannelEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"cc6kxbarModuleChannelTable shows the operational status
of fabric channels. This table will be instantiated only when
cc6kxbarFabricActiveSlot has a valid value other than zero."::={ cc6kxbarStatus 4}cc6kxbarModuleChannelEntry OBJECT-TYPESYNTAX Cc6kxbarModuleChannelEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in cc6kxbarModuleChannelTable."INDEX{
cc6kxbarModuleChannelModule,
cc6kxbarModuleChannelChannel
}::={ cc6kxbarModuleChannelTable 1}
Cc6kxbarModuleChannelEntry ::=SEQUENCE{
cc6kxbarModuleChannelModule ModuleSlotNumber,
cc6kxbarModuleChannelChannel FabricChannelNumber,
cc6kxbarModuleChannelModStatus ChannelStatus,
cc6kxbarModuleChannelFabStatus ChannelStatus,
cc6kxbarModuleChannelSpeed Gauge32}cc6kxbarModuleChannelModule OBJECT-TYPE
SYNTAX ModuleSlotNumber
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The module slot number."::={ cc6kxbarModuleChannelEntry 1}cc6kxbarModuleChannelChannel OBJECT-TYPESYNTAX FabricChannelNumber
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Fabric channel number of the cc6kxbarModuleChannelModule."::={ cc6kxbarModuleChannelEntry 2}cc6kxbarModuleChannelModStatus OBJECT-TYPESYNTAX ChannelStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The status of the fabric channel at the
cc6kxbarModuleChannelModule."::={ cc6kxbarModuleChannelEntry 3}
cc6kxbarModuleChannelFabStatus OBJECT-TYPESYNTAX ChannelStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The status of the fabric channel at the
cc6kxbarFabricActiveSlot."::={ cc6kxbarModuleChannelEntry 4}cc6kxbarModuleChannelSpeed OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The speed in mega bits per second of the
cc6kxbarModuleChannelChannel for cc6kxbarModuleChannelModule."::={ cc6kxbarModuleChannelEntry 5}-- Statistics Objectscc6kxbarStatisticsTable OBJECT-TYPESYNTAXSEQUENCEOF Cc6kxbarStatisticsEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"cc6kxbarStatisticsTable gives the
fabric channel counters and utilization
information. This table will be instantiated when
cc6kxbarFabricActiveSlot has a valid value other than
zero."::={ cc6kxbarStatistics 1}cc6kxbarStatisticsEntry OBJECT-TYPESYNTAX Cc6kxbarStatisticsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in cc6kxbarStatisticsTable."INDEX{
cc6kxbarStatisticsModule,
cc6kxbarStatisticsChannel
}::={ cc6kxbarStatisticsTable 1}
Cc6kxbarStatisticsEntry ::=SEQUENCE{
cc6kxbarStatisticsModule ModuleSlotNumber,
cc6kxbarStatisticsChannel FabricChannelNumber,
cc6kxbarStatisticsInErrors Counter32,
cc6kxbarStatisticsOutErrors Counter32,
cc6kxbarStatisticsOutDropped Counter32,
cc6kxbarStatisticsInUtil Percent,
cc6kxbarStatisticsOutUtil Percent,
cc6kxbarStatisticsPeakInUtil Percent,
cc6kxbarStatisticsPeakTmInUtil DateAndTime,
cc6kxbarStatisticsPeakOutUtil Percent,
cc6kxbarStatisticsPeakTmOutUtil DateAndTime}cc6kxbarStatisticsModule OBJECT-TYPESYNTAX ModuleSlotNumber
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The module slot number."::={ cc6kxbarStatisticsEntry 1}cc6kxbarStatisticsChannel OBJECT-TYPESYNTAX FabricChannelNumber
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Fabric channel number associated with the
cc6kxbarStatisticsModule."::={ cc6kxbarStatisticsEntry 2}cc6kxbarStatisticsInErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of error packets received on
cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule
since this entry was last initialized."::={ cc6kxbarStatisticsEntry 3}cc6kxbarStatisticsOutErrors OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of error packets transmitted on
cc6kxbarStatisticsModule through the
cc6kxbarStatisticsChannel since this entry was
last initialized."::={ cc6kxbarStatisticsEntry 4}cc6kxbarStatisticsOutDropped OBJECT-TYPE
SYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of dropped packets transmitted on the
cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule
since this entry was last initialized."::={ cc6kxbarStatisticsEntry 5}cc6kxbarStatisticsInUtil OBJECT-TYPESYNTAX Percent
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Input utilization of the cc6kxbarStatisticsChannel for
cc6kxbarStatisticsModule."::={ cc6kxbarStatisticsEntry 6}cc6kxbarStatisticsOutUtil OBJECT-TYPESYNTAX Percent
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Output utilization of the cc6kxbarStatisticsChannel for
cc6kxbarStatisticsModule."::={ cc6kxbarStatisticsEntry 7}cc6kxbarStatisticsPeakInUtil OBJECT-TYPESYNTAX Percent
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the peak value of cc6kxbarStatisticsInUtil of the
cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule."::={cc6kxbarStatisticsEntry 8}cc6kxbarStatisticsPeakTmInUtil OBJECT-TYPESYNTAXDateAndTimeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the time of most recent change in the corresponding
instance value of cc6kxbarStatisticsPeakInUtil."::={cc6kxbarStatisticsEntry 9}cc6kxbarStatisticsPeakOutUtil OBJECT-TYPESYNTAX Percent
MAX-ACCESSread-only
STATUScurrentDESCRIPTION"Indicates the peak value of cc6kxbarStatisticsOutUtil of the
cc6kxbarStatisticsChannel for cc6kxbarStatisticsModule."::={cc6kxbarStatisticsEntry 10}cc6kxbarStatisticsPeakTmOutUtil OBJECT-TYPESYNTAXDateAndTimeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the time of most recent change in the corresponding
instance value of cc6kxbarStatisticsPeakOutUtil."::={cc6kxbarStatisticsEntry 11}cc6kxbarErrorTable OBJECT-TYPESYNTAXSEQUENCEOF Cc6kxbarErrorEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"cc6kxbarErrorTable provides the fabric channel error information.
This table will be instantiated only when cc6kxbarFabricActiveSlot
has a valid value other than zero."
::={ cc6kxbarStatistics 2}cc6kxbarErrorEntry OBJECT-TYPESYNTAX Cc6kxbarErrorEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in cc6kxbarErrorTable for a specific fabric channel
on a specific module."INDEX{ cc6kxbarErrorModule, cc6kxbarErrorChannel }::={ cc6kxbarErrorTable 1}
Cc6kxbarErrorEntry ::=SEQUENCE{
cc6kxbarErrorModule ModuleSlotNumber,
cc6kxbarErrorChannel FabricChannelNumber,
cc6kxbarErrorModuleCrc Gauge32,
cc6kxbarErrorModuleHbeat Gauge32,
cc6kxbarErrorModuleSync Gauge32,
cc6kxbarErrorModuleDDRSync Gauge32,
cc6kxbarErrorChannelSync Gauge32,
cc6kxbarErrorChannelBuffer Gauge32,
cc6kxbarErrorChannelTimeout Gauge32}cc6kxbarErrorModule OBJECT-TYPESYNTAX ModuleSlotNumber
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The module slot number."::={ cc6kxbarErrorEntry 1}cc6kxbarErrorChannel OBJECT-TYPESYNTAX FabricChannelNumber
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Fabric channel number associated with the
cc6kxbarErrorModule."::={ cc6kxbarErrorEntry 2}cc6kxbarErrorModuleCrc OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the total number of CRC error packets for the
cc6kxbarErrorChannel of the cc6kxbarErrorModule."::={ cc6kxbarErrorEntry 3}cc6kxbarErrorModuleHbeat OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the total number of heartbeat misses detected for the
cc6kxbarErrorChannel of the cc6kxbarErrorModule."::={ cc6kxbarErrorEntry 4}cc6kxbarErrorModuleSync OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the total number of times cc6kxbarErrorModule could
not sync to the active switching fabric module."::={ cc6kxbarErrorEntry 5}cc6kxbarErrorModuleDDRSync OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"Indicates the total number of DDR(Double Data Rate) channel
sync errors for the cc6kxbarErrorChannel of the
cc6kxbarErrorModule."::={ cc6kxbarErrorEntry 6}cc6kxbarErrorChannelSync OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the total number of sync errors received at
cc6kxbarErrorChannel."::={ cc6kxbarErrorEntry 7}cc6kxbarErrorChannelBuffer OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the total number of times the memory buffer for
cc6kxbarErrorChannel of the cc6kxbarErrorModule is full."::={ cc6kxbarErrorEntry 8}
cc6kxbarErrorChannelTimeout OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the total number of timeouts for input from
the cc6kxbarErrorChannel of the cc6kxbarErrorModule."::={ cc6kxbarErrorEntry 9}-- Switching Bus Objectscc6kxbarSwBusSwitchingStatus OBJECT-TYPESYNTAXINTEGER{normal(1),stalled(2),isolated(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the current switching status of the
switching bus on the system.
normal -- the switching bus is under normal
packet switching operation.
stalled -- the switching bus has stopped packet
switching but is still attached to
the system, i.e., the switching bus
is stalled.
isolated -- the switching bus has stopped packet
switching and is detached from
the system, i.e., the switching bus
is isolated.
The object is only instantiated on systems which
support switching bus switching detection feature."::={ cc6kxbarSwBusObjects 1}cc6kxbarSwBusFailureDuration OBJECT-TYPESYNTAXUnsigned32UNITS"seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the failure duration of the switching
bus since the switching bus has transitioned
out of the normal(1) state as monitored by
cc6kxbarSwBusSwitchingStatus. If the object
value of cc6kxbarSwBusSwitchingStatus is
normal(1), then the object value of
cc6kxbarSwBusFailureDuration should be zero.
The object is only instantiated on systems which
support switching bus switching detection feature."::={ cc6kxbarSwBusObjects 2}cc6kxbarSwBusNotifEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicates whether or not the notification
cc6kxbarSwBusStatusChangeNotif should be generated
when there is change in the switching status of the
switching bus as monitored by
cc6kxbarSwBusSwitchingStatus.
The object is only instantiated on systems which
support switching bus switching detection feature."::={ cc6kxbarSwBusObjects 3}cc6kxbarSwBusUtilization OBJECT-TYPESYNTAX Percent
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the percentage of bandwidth utilization
of the switching bus."::={ cc6kxbarSwBusObjects 4}
cc6kxbarSwBusPeakUtilization OBJECT-TYPESYNTAX Percent
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the peak percentage value of bandwidth
utilization of the switching bus since the system
started."::={ cc6kxbarSwBusObjects 5}cc6kxbarSwBusPeakTimeUtil OBJECT-TYPESYNTAXDateAndTimeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the time at which the peak percentage value
of bandwidth utilization of the switching bus value
occurred."::={ cc6kxbarSwBusObjects 6}-- Internal Bus Objectscc6kxbarIntBusNotifEnable OBJECT-TYPESYNTAXBITS{
intBusCRCErrExcd(0),intBusCRCErrRcvrd(1)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Indicates whether the generation of a specified
notification for internal bus is enabled or not.
If a bit corresponding to a notification is set to
1, then that notification can be generated.
intBusCRCErrExcd -- the cc6kxbarIntBusCRCErrExcdNotif
notification.
intBusCRCErrRcvrd -- the cc6kxbarIntBusCRCErrRcvrdNotif
notification.
"::={ cc6kxbarIntBusObjects 1}cc6kxbarIntBusCRCErrTable OBJECT-TYPESYNTAXSEQUENCEOF Cc6kxbarIntBusCRCErrEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table containing internal bus CRC error information
on a list of physical entities (such as modules)."::={ cc6kxbarIntBusObjects 2}cc6kxbarIntBusCRCErrEntry OBJECT-TYPESYNTAX Cc6kxbarIntBusCRCErrEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry containing internal bus CRC error information
on a physical entity (such as a module)."INDEX{ entPhysicalIndex }::={ cc6kxbarIntBusCRCErrTable 1}
Cc6kxbarIntBusCRCErrEntry ::=SEQUENCE{
cc6kxbarIntBusCRCErrExcdStatus TruthValue,
cc6kxbarIntBusCRCErrExcdCount Unsigned32}cc6kxbarIntBusCRCErrExcdStatus OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"Indicates whether the internal bus CRC error
on a physical entity is currently exceeding the fatal
threshold or not."::={ cc6kxbarIntBusCRCErrEntry 1}cc6kxbarIntBusCRCErrExcdCount OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the number of times the internal bus CRC
error on a physical entity has exceeded the fatal
threshold."::={ cc6kxbarIntBusCRCErrEntry 2}-- Flow Control Objectscc6kxbarFlowCtrlNotifEnable OBJECT-TYPESYNTAXBITS{busThreshExcd(0)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION
"Specifies whether the generation of a specified
notification for flow control feature is enabled or
not. If a bit corresponding to a notification is set
to one, then that notification can be generated.
busThreshExcd -- the cc6kxbarFlowCtrlBusThrExcdNotif
notification.
"::={ cc6kxbarFlowCtrlObjects 1}cc6kxbarFlowCtrlBusFIFOThrMode OBJECT-TYPESYNTAXINTEGER{off(1),on(2),auto(3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the mode configuration of the system bus
flow control FIFO threshold.
off -- the flow control FIFO threshold is set to the
original value defined by the system.
on -- the flow control FIFO threshold is set to the
lower value defined by the system.
auto -- the system starts monitoring the system bus
flow control FIFO threshold and will change the
flow control FIFO threshold from the original
value to the lower value when the system detects
the first occurrence of the threshold exceeding
on a physical entity (such as a module) over
the system allowed limit."::={ cc6kxbarFlowCtrlObjects 2}cc6kxbarFlowCtrlBusFIFOThrValue OBJECT-TYPESYNTAXINTEGER{original(1),lower(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the current value of the system bus flow
control FIFO threshold, whether it is the original
value or the lower value."::={ cc6kxbarFlowCtrlObjects 3}
cc6kxbarFlowCtrlBusFIFOTransTime OBJECT-TYPESYNTAXTimeStampMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the value of sysUpTime at the time
that the system bus flow control FIFO threshold
is transitioned to lower value when the object value
of cc6kxbarFlowCtrlBusFIFOThrValue is 'lower'. This
object will take on the value of zero when the object
value of cc6kxbarFlowCtrlBusFIFOThrValue is
'original'."::={ cc6kxbarFlowCtrlObjects 4}-- System Capacity Objectscc6kxbarSysCapPfcOperMode OBJECT-TYPESYNTAXINTEGER{unknown(1),pfc3a(2),pfc3b(3),pfc3bxl(4),
pfc3cst1(5),pfc3cxlst1(6),pfc3c(7),pfc3cxl(8)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the operating mode of the policy feature
card (PFC).
unknown -- unknown.
pfc3a -- Policy feature card 3A.
pfc3b -- Policy feature card 3B.
pfc3bxl -- Policy feature card 3B XL.
pfc3cst1 -- Policy feature card 3C ST1.
pfc3cxlst1 -- Policy feature card 3C XL ST1.
pfc3c -- Policy feature card 3C.
pfc3cxl -- Policy feature card 3C XL.
"::={ cc6kxbarSystemCapacityObjects 1}cc6kxbarSysCapSwitchResTable OBJECT-TYPE
SYNTAXSEQUENCEOF Cc6kxbarSysCapSwitchResEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A cc6kxbarSysCapSwitchResTable entry lists
the capacity information of the switching
resources for ENTITY-MIB entPhysicalTable entries
of manageable components with type entPhysicalClass
module(9).
"::={ cc6kxbarSystemCapacityObjects 2}cc6kxbarSysCapSwitchResEntry OBJECT-TYPESYNTAX Cc6kxbarSysCapSwitchResEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A cc6kxbarSysCapSwitchResEntry entry lists
the capacity information of the switching
resources for ENTITY-MIB entPhysicalTable entries
of manageable components with type entPhysicalClass
module(9).
Entries are created by the agent at the system power-up
or module insertion.
Entries are deleted by the agent upon module removal.
"INDEX{ entPhysicalIndex }::={ cc6kxbarSysCapSwitchResTable 1}
Cc6kxbarSysCapSwitchResEntry ::=SEQUENCE{
cc6kxbarSysCapSwitchResSeries INTEGER,
cc6kxbarSysCapSwitchResCefMode INTEGER}cc6kxbarSysCapSwitchResSeries OBJECT-TYPESYNTAXINTEGER{unknown(1),supervisor(2),classic(3),fabric(4),dcef720(5),cef720(6),dcef256(7),cef256(8)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Indicates the module series for traffic forwarding options.
unknown -- unknown.
supervisor -- supervisor module.
classic -- classic module.
fabric -- fabric module.
dcef720 -- dCEF720 module.
cef720 -- CEF720 module.
dcef256 -- dCEF256 module.
cef256 -- CEF256 module.
"::={ cc6kxbarSysCapSwitchResEntry 1}cc6kxbarSysCapSwitchResCefMode OBJECT-TYPESYNTAXINTEGER{notApplicable(1),dcef(2),cef(3)}MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"Indicates the Cisco Express Forwarding (CEF) mode of
the module.
notApplicable -- not applicable for this module.
dcef -- distributed CEF.
cef -- CEF.
"::={ cc6kxbarSysCapSwitchResEntry 2}-- Fabric Error Recovery Objectscc6kxbarErrRcvryThreshLink OBJECT-TYPESYNTAXUnsigned32(1..4294967295)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the threshold on fabric link errors occuring
in a channel for the fabric error recovery feature."::={ cc6kxbarErrorRecoveryObjects 1}cc6kxbarErrRcvryThreshPersLink OBJECT-TYPESYNTAXUnsigned32(1..4294967295)MAX-ACCESSread-write
STATUScurrentDESCRIPTION"Specifies the threshold on persistent fabric link errors
occuring in a channel for the fabric error recovery feature."::={ cc6kxbarErrorRecoveryObjects 2}cc6kxbarErrRcvrySwitchoverEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies whether the switchover to the standby fabric module
is enabled or not on the detection of excessive fabric link
errors occurring in a channel for the fabric error recovery
feature."::={ cc6kxbarErrorRecoveryObjects 3}-- NotificationsciscoCat6kXbarMIBNotifs OBJECTIDENTIFIER::={ ciscoCat6kCrossbarMIB 0}cc6kxbarSwBusStatusChangeNotif NOTIFICATION-TYPE
OBJECTS{
cc6kxbarSwBusSwitchingStatus,
cc6kxbarSwBusFailureDuration
}STATUScurrentDESCRIPTION"A cc6kxbarSwBusStatusChangeNotif notification
is sent by the the device when there is change
in switching status of the switching bus as
monitored by cc6kxbarSwBusSwitchingStatus."::={ ciscoCat6kXbarMIBNotifs 1}cc6kxbarIntBusCRCErrExcdNotif NOTIFICATION-TYPEOBJECTS{
entPhysicalName,
entPhysicalVendorType
}STATUScurrentDESCRIPTION"A cc6kxbarIntBusCRCThreshExcdNotif notification
is sent by the system when the system has
detected that the internal bus CRC error on
a physical entity (such as a module) as specified
by entPhysicalName has exceeded the fatal threshold."::={ ciscoCat6kXbarMIBNotifs 2}
cc6kxbarIntBusCRCErrRcvrdNotif NOTIFICATION-TYPEOBJECTS{
entPhysicalName,
entPhysicalVendorType
}STATUScurrentDESCRIPTION"A cc6kxbarIntBusCRCErrRcvrdNotif notification
is sent by the system when the system has
recovered as the internal bus CRC error on
a physical entity (such as a module) as
specified by entPhysicalName has fallen below
the normal threshold."::={ ciscoCat6kXbarMIBNotifs 3}cc6kxbarFlowCtrlBusThrExcdNotif NOTIFICATION-TYPEOBJECTS{
entPhysicalName,
entPhysicalVendorType
}STATUScurrentDESCRIPTION"A cc6kxbarFlowCtrlBusThrExcdNotif notification
is sent by the system when the system detects the
first occurrence of the system bus flow control FIFO
threshold exceeding on a physical entity
(such as a module) over the system allowed limit
when the object value of
cc6kxbarFlowCtrlBusFIFOThrMode is 'auto'."::={ ciscoCat6kXbarMIBNotifs 4}-- Conformance and Compliancecc6kxbarMIBConformance OBJECTIDENTIFIER::={ ciscoCat6kCrossbarMIB 3}cc6kxbarMIBCompliances OBJECTIDENTIFIER::={ cc6kxbarMIBConformance 1}cc6kxbarMIBGroups OBJECTIDENTIFIER::={ cc6kxbarMIBConformance 2}-- Conformancecc6kxbarMIBCompliance MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."MODULE-- this moduleMANDATORY-GROUPS{
cc6kxbarModuleStatusGroup,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroup
}GROUP cc6kxbarFallbackGroup
DESCRIPTION"This group is mandatory only for those platforms which
support fallback mode feature."GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support busonly mode feature."::={ cc6kxbarMIBCompliances 2}cc6kxbarMIBComplianceVer1 MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."MODULE-- this moduleMANDATORY-GROUPS{
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}GROUP cc6kxbarFallbackGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support fallback mode feature."GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support bus only mode feature."GROUP cc6kxbarLcdBannerGroup
DESCRIPTION"This group is mandatory only for those platforms which
support lcd banner feature."GROUP cc6kxbarChannelUtilGroup
DESCRIPTION"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support fabric channel speed feature."GROUP cc6kxbarSwBusGroup
DESCRIPTION"This group is mandatory only for platforms which support
switching bus switching detection feature."GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."::={ cc6kxbarMIBCompliances 3}cc6kxbarMIBComplianceVer2 MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."MODULE-- this moduleMANDATORY-GROUPS{
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}GROUP cc6kxbarFallbackGroup
DESCRIPTION"This group is mandatory only for those platforms which
support fallback mode feature."GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support bus only mode feature."GROUP cc6kxbarLcdBannerGroup
DESCRIPTION"This group is mandatory only for those platforms which
support lcd banner feature."GROUP cc6kxbarChannelUtilGroup
DESCRIPTION"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support fabric channel speed feature."GROUP cc6kxbarSwBusGroup
DESCRIPTION"This group is mandatory only for platforms which support
switching bus switching detection feature."GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."GROUP cc6kxbarTruncatedOperGroup
DESCRIPTION"This group is mandatory only for platforms which support
operational truncated mode."::={ cc6kxbarMIBCompliances 4}cc6kxbarMIBComplianceVer3 MODULE-COMPLIANCESTATUSdeprecated
DESCRIPTION"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."MODULE-- this moduleMANDATORY-GROUPS{
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}GROUP cc6kxbarFallbackGroup
DESCRIPTION"This group is mandatory only for those platforms which
support fallback mode feature."GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support bus only mode feature."GROUP cc6kxbarLcdBannerGroup
DESCRIPTION"This group is mandatory only for those platforms which
support lcd banner feature."GROUP cc6kxbarChannelUtilGroup
DESCRIPTION"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."
GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support fabric channel speed feature."GROUP cc6kxbarSwBusGroup
DESCRIPTION"This group is mandatory only for platforms which support
switching bus switching detection feature."GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."GROUP cc6kxbarTruncatedOperGroup
DESCRIPTION"This group is mandatory only for platforms which support
operational truncated mode."GROUP cc6kxbarIntBusNotifControlGroup
DESCRIPTION"This group is mandatory only for platforms which support
internal bus notifications."GROUP cc6kxbarIntBusCRCErrNotifGroup
DESCRIPTION"This group is mandatory only for platforms which support
internal bus CRC error notifications."::={ cc6kxbarMIBCompliances 5}
cc6kxbarMIBComplianceVer4 MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."MODULE-- this moduleMANDATORY-GROUPS{
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}GROUP cc6kxbarFallbackGroup
DESCRIPTION"This group is mandatory only for those platforms which
support fallback mode feature."GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support bus only mode feature."GROUP cc6kxbarLcdBannerGroup
DESCRIPTION"This group is mandatory only for those platforms which
support lcd banner feature."GROUP cc6kxbarChannelUtilGroup
DESCRIPTION
"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support fabric channel speed feature."GROUP cc6kxbarSwBusGroup
DESCRIPTION"This group is mandatory only for platforms which support
switching bus switching detection feature."GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."GROUP cc6kxbarTruncatedOperGroup
DESCRIPTION"This group is mandatory only for platforms which support
operational truncated mode."GROUP cc6kxbarIntBusNotifControlGroup
DESCRIPTION"This group is mandatory only for platforms which support
internal bus notifications."GROUP cc6kxbarIntBusCRCErrNotifGroup
DESCRIPTION"This group is mandatory only for platforms which support
internal bus CRC error notifications."GROUP cc6kxbarIntBusCRCErrGroup
DESCRIPTION"This group is mandatory only for platforms which support
internal bus CRC error status."::={ cc6kxbarMIBCompliances 6}cc6kxbarMIBComplianceVer5 MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."MODULE-- this moduleMANDATORY-GROUPS{
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}GROUP cc6kxbarFallbackGroup
DESCRIPTION"This group is mandatory only for those platforms which
support fallback mode feature."GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support bus only mode feature."GROUP cc6kxbarLcdBannerGroup
DESCRIPTION"This group is mandatory only for those platforms which
support lcd banner feature."GROUP cc6kxbarChannelUtilGroup
DESCRIPTION"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support fabric channel speed feature."GROUP cc6kxbarSwBusGroup
DESCRIPTION"This group is mandatory only for platforms which support
switching bus switching detection feature."GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."GROUP cc6kxbarTruncatedOperGroup
DESCRIPTION"This group is mandatory only for platforms which support
operational truncated mode."
GROUP cc6kxbarIntBusNotifControlGroup
DESCRIPTION"This group is mandatory only for platforms which support
internal bus notifications."GROUP cc6kxbarIntBusCRCErrNotifGroup
DESCRIPTION"This group is mandatory only for platforms which support
internal bus CRC error notifications."GROUP cc6kxbarIntBusCRCErrGroup
DESCRIPTION"This group is mandatory only for platforms which support
internal bus CRC error status."GROUP cc6kxbarDcefOnlyModeAllowedGroup
DESCRIPTION"This group is mandatory only for platforms which support
dcef only mode feature."GROUP cc6kxbarForceBusModeGroup
DESCRIPTION"This group is mandatory only for platforms which support
force bus mode feature."GROUP cc6kxbarFlowCtrlNotifCtrlGroup
DESCRIPTION"This group is mandatory only for platforms which support
the system flow control notification control."GROUP cc6kxbarFlowCtrlBusThreshGroup
DESCRIPTION
"This group is mandatory only for platforms which support
the system bus flow control FIFO threshold configuration."GROUP cc6kxbarFlowCtrlBusThrNotifGroup
DESCRIPTION"This group is mandatory only for platforms which support
the system bus flow control FIFO threshold exceeding
notification."GROUP cc6kxbarBusOnlyModeOperGroup
DESCRIPTION"This group is mandatory only for platforms which support
operational bus mode."::={ cc6kxbarMIBCompliances 7}cc6kxbarMIBComplianceVer6 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for
the CISCO-CAT6K-CROSSBAR-MIB."MODULE-- this moduleMANDATORY-GROUPS{
cc6kxbarModuleStatusGroupVer1,
cc6kxbarChannelStatusGroup,
cc6kxbarChannelStatisticsGroupVer1
}GROUP cc6kxbarFallbackGroup
DESCRIPTION"This group is mandatory only for those platforms which
support fallback mode feature."GROUP cc6kxbarBusOnlyAllowedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support bus only mode feature."GROUP cc6kxbarLcdBannerGroup
DESCRIPTION"This group is mandatory only for those platforms which
support lcd banner feature."GROUP cc6kxbarChannelUtilGroup
DESCRIPTION"This group is mandatory only for those platforms which
support Input and Output traffic utilization on the
fabric channel."GROUP cc6kxbarChannelSpeedGroup
DESCRIPTION"This group is mandatory only for those platforms which
support fabric channel speed feature."GROUP cc6kxbarSwBusGroup
DESCRIPTION"This group is mandatory only for platforms which support
switching bus switching detection feature."GROUP cc6kxbarSwBusNotifGroup
DESCRIPTION"This group is mandatory only for platforms which support
switching bus switching detection notification
feature."GROUP cc6kxbarTruncatedOperGroup
DESCRIPTION"This group is mandatory only for platforms which support
operational truncated mode."GROUP cc6kxbarIntBusNotifControlGroup
DESCRIPTION"This group is mandatory only for platforms which support
internal bus notifications."GROUP cc6kxbarIntBusCRCErrNotifGroup
DESCRIPTION"This group is mandatory only for platforms which support
internal bus CRC error notifications."GROUP cc6kxbarIntBusCRCErrGroup
DESCRIPTION"This group is mandatory only for platforms which support
internal bus CRC error status."GROUP cc6kxbarDcefOnlyModeAllowedGroup
DESCRIPTION"This group is mandatory only for platforms which support
dcef only mode feature."GROUP cc6kxbarForceBusModeGroup
DESCRIPTION"This group is mandatory only for platforms which support
force bus mode feature."
GROUP cc6kxbarFlowCtrlNotifCtrlGroup
DESCRIPTION"This group is mandatory only for platforms which support
the system flow control notification control."GROUP cc6kxbarFlowCtrlBusThreshGroup
DESCRIPTION"This group is mandatory only for platforms which support
the system bus flow control FIFO threshold configuration."GROUP cc6kxbarFlowCtrlBusThrNotifGroup
DESCRIPTION"This group is mandatory only for platforms which support
the system bus flow control FIFO threshold exceeding
notification."GROUP cc6kxbarBusOnlyModeOperGroup
DESCRIPTION"This group is mandatory only for platforms which support
operational bus mode."GROUP cc6kxbarSysCapPfcOperModeGroup
DESCRIPTION"This group is mandatory only for platforms which
support the system information of PFC operational mode."GROUP cc6kxbarSysCapSwitchResGroup
DESCRIPTION"This group is mandatory only for platforms which
support the capacity information of switching
resources in the system."
GROUP cc6kxbarChannelUtilGroup1
DESCRIPTION"This group is mandatory only for those platforms which
support peak input and output traffic utilization on the
fabric channel."GROUP cc6kxbarSwBusGroup1
DESCRIPTION"This group is mandatory only for platforms which support
switching bus utilization."GROUP cc6kxbarErrorGroup
DESCRIPTION"This group is mandatory only for those platforms which
support error statistics on the fabric channel."GROUP cc6kxbarErrRcvryThresholdGroup
DESCRIPTION"This group is mandatory for platforms which provide
the configuration of thresholds on fabric link errors
for the fabric error recovery feature."GROUP cc6kxbarErrRcvrySwitchoverGroup
DESCRIPTION"This group is mandatory for platforms which provide
the configuration of fabric switchover on excessive fabric
link errors for the fabric error recovery feature."::={ cc6kxbarMIBCompliances 8}-- Units of Conformancecc6kxbarModuleStatusGroup OBJECT-GROUP
OBJECTS{
cc6kxbarLcdBannerMaxSize,
cc6kxbarLcdBannerBanner,
cc6kxbarTruncatedModeAllowed,
cc6kxbarMinFabricPresent,
cc6kxbarFabricActiveSlot,
cc6kxbarFabricBackupSlot,
cc6kxbarModuleModeSwitchingMode
}STATUSdeprecatedDESCRIPTION"A collection of objects providing
configuration and operation of the crossbar
switching fabric module and switching capable
module."::={ cc6kxbarMIBGroups 1}cc6kxbarChannelStatusGroup OBJECT-GROUPOBJECTS{
cc6kxbarModuleChannelModStatus,
cc6kxbarModuleChannelFabStatus
}STATUScurrentDESCRIPTION"A collection of objects providing
status and configuration of the fabric channel."::={ cc6kxbarMIBGroups 2}cc6kxbarChannelStatisticsGroup OBJECT-GROUPOBJECTS{
cc6kxbarStatisticsInErrors,
cc6kxbarStatisticsOutErrors,
cc6kxbarStatisticsOutDropped,
cc6kxbarStatisticsInUtil,
cc6kxbarStatisticsOutUtil
}STATUSdeprecatedDESCRIPTION"A collection of objects providing statistics for
the fabric channel."::={ cc6kxbarMIBGroups 3}cc6kxbarFallbackGroup OBJECT-GROUPOBJECTS{ cc6kxbarFallbackMode }STATUScurrentDESCRIPTION"This object controls system fallback to bus-mode
after loss of switching fabric module."
::={ cc6kxbarMIBGroups 4}cc6kxbarBusOnlyAllowedGroup OBJECT-GROUPOBJECTS{ cc6kxbarBusOnlyModeAllowed }STATUScurrentDESCRIPTION"This object determines the value of
cc6kxbarModuleModeSwitchingMode of each module."::={ cc6kxbarMIBGroups 5}cc6kxbarModuleStatusGroupVer1 OBJECT-GROUPOBJECTS{
cc6kxbarTruncatedModeAllowed,
cc6kxbarMinFabricPresent,
cc6kxbarFabricActiveSlot,
cc6kxbarFabricBackupSlot,
cc6kxbarModuleModeSwitchingMode
}STATUScurrentDESCRIPTION"A collection of objects providing
configuration and operation of the crossbar
switching fabric module and switching capable
module."::={ cc6kxbarMIBGroups 6}
cc6kxbarChannelStatisticsGroupVer1 OBJECT-GROUPOBJECTS{
cc6kxbarStatisticsInErrors,
cc6kxbarStatisticsOutErrors,
cc6kxbarStatisticsOutDropped
}STATUScurrentDESCRIPTION"A collection of objects providing statistics for
the fabric channel."::={ cc6kxbarMIBGroups 7}cc6kxbarLcdBannerGroup OBJECT-GROUPOBJECTS{
cc6kxbarLcdBannerMaxSize,
cc6kxbarLcdBannerBanner
}STATUScurrentDESCRIPTION"A collection of objects providing configuration of
the lcd Banner of the fabric module."::={ cc6kxbarMIBGroups 8}cc6kxbarChannelUtilGroup OBJECT-GROUP
OBJECTS{
cc6kxbarStatisticsInUtil,
cc6kxbarStatisticsOutUtil
}STATUScurrentDESCRIPTION"These object determines Input and Output Utilization of the
fabric channel."::={ cc6kxbarMIBGroups 9}cc6kxbarChannelSpeedGroup OBJECT-GROUPOBJECTS{ cc6kxbarModuleChannelSpeed }STATUScurrentDESCRIPTION"A collection of objects providing the
speed of the fabric channel."::={ cc6kxbarMIBGroups 10}cc6kxbarSwBusGroup OBJECT-GROUPOBJECTS{
cc6kxbarSwBusSwitchingStatus,
cc6kxbarSwBusFailureDuration,
cc6kxbarSwBusNotifEnable
}
STATUScurrentDESCRIPTION"A collection of objects for the switching bus switching
detection feature."::={ cc6kxbarMIBGroups 11}cc6kxbarSwBusNotifGroup NOTIFICATION-GROUPNOTIFICATIONS{ cc6kxbarSwBusStatusChangeNotif }STATUScurrentDESCRIPTION"A collection of notifications for the switching
bus switching detection feature."::={ cc6kxbarMIBGroups 12}cc6kxbarTruncatedOperGroup OBJECT-GROUPOBJECTS{ cc6kxbarTruncatedModeOper }STATUScurrentDESCRIPTION"A collection of objects providing the
operational truncated mode."::={ cc6kxbarMIBGroups 13}cc6kxbarIntBusNotifControlGroup OBJECT-GROUP
OBJECTS{ cc6kxbarIntBusNotifEnable }STATUScurrentDESCRIPTION"A collection of objects to control the notification
generation for internal bus."::={ cc6kxbarMIBGroups 14}cc6kxbarIntBusCRCErrNotifGroup NOTIFICATION-GROUPNOTIFICATIONS{
cc6kxbarIntBusCRCErrExcdNotif,
cc6kxbarIntBusCRCErrRcvrdNotif
}STATUScurrentDESCRIPTION"A collection of notifications for the
internal bus CRC error."::={ cc6kxbarMIBGroups 15}cc6kxbarIntBusCRCErrGroup OBJECT-GROUPOBJECTS{
cc6kxbarIntBusCRCErrExcdStatus,
cc6kxbarIntBusCRCErrExcdCount
}STATUScurrent
DESCRIPTION"A collection of objects to indicate the internal bus
CRC error information on a physical entity."::={ cc6kxbarMIBGroups 16}cc6kxbarDcefOnlyModeAllowedGroup OBJECT-GROUPOBJECTS{ cc6kxbarDcefOnlyModeAllowed }STATUScurrentDESCRIPTION"A collection of objects providing the configuration
and information about the dcef only mode feature."::={ cc6kxbarMIBGroups 17}cc6kxbarForceBusModeGroup OBJECT-GROUPOBJECTS{ cc6kxbarForceBusMode }STATUScurrentDESCRIPTION"A collection of objects providing the configuration
and information about the force bus mode feature."::={ cc6kxbarMIBGroups 18}cc6kxbarFlowCtrlNotifCtrlGroup OBJECT-GROUP
OBJECTS{ cc6kxbarFlowCtrlNotifEnable }STATUScurrentDESCRIPTION"A collection of objects to control the notification
generation for the system flow control feature."::={ cc6kxbarMIBGroups 19}cc6kxbarFlowCtrlBusThreshGroup OBJECT-GROUPOBJECTS{
cc6kxbarFlowCtrlBusFIFOThrMode,
cc6kxbarFlowCtrlBusFIFOThrValue,
cc6kxbarFlowCtrlBusFIFOTransTime
}STATUScurrentDESCRIPTION"A collection of objects providing configuration
information about the system bus flow control FIFO
threshold."::={ cc6kxbarMIBGroups 20}cc6kxbarFlowCtrlBusThrNotifGroup NOTIFICATION-GROUPNOTIFICATIONS{ cc6kxbarFlowCtrlBusThrExcdNotif }STATUScurrent
DESCRIPTION"A collection of notifications for the system bus
flow control FIFO threshold exceeding."::={ cc6kxbarMIBGroups 21}cc6kxbarBusOnlyModeOperGroup OBJECT-GROUPOBJECTS{ cc6kxbarBusOnlyModeOper }STATUScurrentDESCRIPTION"A collection of objects providing the
operational bus mode."::={ cc6kxbarMIBGroups 22}cc6kxbarSysCapPfcOperModeGroup OBJECT-GROUPOBJECTS{ cc6kxbarSysCapPfcOperMode }STATUScurrentDESCRIPTION"A collection of objects providing the system
information of PFC operational mode."::={ cc6kxbarMIBGroups 23}cc6kxbarSysCapSwitchResGroup OBJECT-GROUPOBJECTS{
cc6kxbarSysCapSwitchResSeries,
cc6kxbarSysCapSwitchResCefMode
}STATUScurrentDESCRIPTION"A collection of objects providing the capacity
information of switching resources in the system."::={ cc6kxbarMIBGroups 24}cc6kxbarChannelUtilGroup1 OBJECT-GROUPOBJECTS{
cc6kxbarStatisticsPeakInUtil,
cc6kxbarStatisticsPeakTmInUtil,
cc6kxbarStatisticsPeakOutUtil,
cc6kxbarStatisticsPeakTmOutUtil
}STATUScurrentDESCRIPTION"A collection of objects providing the information about peak
input and output utilization of a specific fabric channel on
a specific module."::={ cc6kxbarMIBGroups 25}cc6kxbarSwBusGroup1 OBJECT-GROUPOBJECTS{
cc6kxbarSwBusUtilization,
cc6kxbarSwBusPeakUtilization,
cc6kxbarSwBusPeakTimeUtil
}STATUScurrentDESCRIPTION"A collection of objects providing the information about
switching bus utilization."::={ cc6kxbarMIBGroups 26}cc6kxbarErrorGroup OBJECT-GROUPOBJECTS{
cc6kxbarErrorModuleCrc,
cc6kxbarErrorModuleHbeat,
cc6kxbarErrorModuleSync,
cc6kxbarErrorModuleDDRSync,
cc6kxbarErrorChannelSync,
cc6kxbarErrorChannelBuffer,
cc6kxbarErrorChannelTimeout
}STATUScurrentDESCRIPTION"A collection of objects providing error statistics for
a specific fabric channel on a specific module."::={ cc6kxbarMIBGroups 27}cc6kxbarErrRcvryThresholdGroup OBJECT-GROUPOBJECTS{
cc6kxbarErrRcvryThreshLink,
cc6kxbarErrRcvryThreshPersLink
}STATUScurrentDESCRIPTION"A collection of objects providing the configuration
of thresholds on fabric link errors for the fabric
error recovery feature."::={ cc6kxbarMIBGroups 28}cc6kxbarErrRcvrySwitchoverGroup OBJECT-GROUPOBJECTS{ cc6kxbarErrRcvrySwitchoverEnable }STATUScurrentDESCRIPTION"A collection of objects providing the configuration
of fabric switchover on excessive fabric link errors
for the fabric error recovery feature."::={ cc6kxbarMIBGroups 29}END